The application scope of the hottest glass product

  • Detail

Glass products are increasingly used in decoration.

glass has special properties of light transmission, perspective, sound insulation and heat insulation. With the continuous improvement of people's living standards, glass products are increasingly used in decoration. At present, glass doors and windows, partitions and glass decoration are very popular in home decoration

classification of glass materials

the leading category is the glass plate, which is mainly used for the parts requiring lighting in decoration. There are flat glass, embossed glass, frosted glass, coated glass, engraved glass, tempered glass and other varieties, which can be selected according to the requirements of different parts and different decorative effects

the other is glass bricks, which are mainly used in glass partition, glass wall and other projects. They are mainly hollow products, breaking the pattern of glass bricks monopolized by foreign competitors for a long time. It can be divided into single cavity and double cavity, and has many specifications such as square brick and rectangular brick. Its surface modeling is also very rich, which can be selected and used according to the decoration needs

quality identification of glass materials

1 Inspection of glass sheets. The main aspect of appearance quality for our customers is to check the flatness and observe whether there are quality defects such as bubbles, inclusions, scratches, raceways and fog spots. The glass with such defects will deform in use, which will reduce the transparency, mechanical strength and thermal stability of the glass. It is not suitable for engineering. As the glass is a transparent object, the quality can be basically identified by visual inspection during selection

2. Inspection of glass processing products. In addition to testing according to the requirements of flat glass, the processing quality shall also be inspected to check whether the specifications and dimensions are standard, whether the processing accuracy and pattern definition meet the requirements, and at the same time, the edges shall not be incomplete

no cracks are allowed in the appearance quality of hollow glass bricks, no opaque unmelted substance is allowed in the glass body, and no poor fusion and bonding between two glass bodies are allowed. Visual inspection 5. There is a problem with the standard configuration during the maintenance of the tensile machine. The brick body should not have ripple, bubble and glass blank. 1. It is required to install the universal tensile testing machine fixture, and the layered stripe is generated by the heterogeneity in the body. The concave of the outer surface of the large surface of the glass brick shall be less than 1mm, and the convex shall be less than 2mm. The weight shall meet the quality standard, without surface warpage, notch, burr and other quality defects, and the angle shall be square. Zhonghua glass () Department

Copyright © 2011 JIN SHI